Mould Info

Prevention · 4 min read

Simple things to stop mould coming back

Mould needs moisture. Take the moisture away and it can't grow — it's genuinely that simple. Here's what actually works in an average Sydney home.

Watch the humidity

Keep indoor humidity under about 60%. A cheap hygrometer tells you where you stand, and a dehumidifier in the worst room does the heavy lifting through winter.

Dry your laundry properly

Drying clothes on an airer inside puts litres of water into the air. Dry outside where you can, or use a vented dryer with the laundry door shut and the fan running.

Move the air

  • Open windows for 10 minutes each morning, even in winter
  • Run exhaust fans in the kitchen, bathroom and laundry
  • Leave a gap between furniture and external walls
  • Don't overfill wardrobes on cold south-facing walls
  • Wipe condensation off windows before it runs into the frames

Fix the small leaks early

A dripping tap under the sink, a cracked roof tile or a blocked gutter is usually what starts a big mould job. Sorting them early is far cheaper than treating a whole room later.

Still coming back?

If mould keeps returning in the same spot, there's a moisture source you can't see. Call 0428 514 635 for a free quote and we'll find it.

Got mould? Call us right now!

Free quote today. Treatment could start tomorrow. A friendly Aussie tradie will answer the phone, not a call centre.